超级彩票助手

您好,歡迎訪問無錫市嘉隆設備科技有限公司官放網站!

全國咨詢熱線15861434319

當前位置:首頁 > 新聞動態 > 行業新聞 犁刀混合機工作后的殘渣怎么解決?
來源:無錫嘉隆 時間:2018-10-08 點擊量:
大家在使用犁刀混合機之后有沒有給它做好保養工作呢?畢竟犁刀混合機在使用之后里面會殘余一些物料,出于各方面的考慮,我們都需要把殘渣清除出去。在清理的過程當中,我們可能會遇到一些難清理的地方,這個時候就需要用一些技巧了。 
首先第一步要做的是檢查油脂添加管路中是否有氣體噴吹裝置。還有犁刀混合機噴油嘴是否被堵。濾油罐中篩網是否損壞。就要調整犁刀混合機噴嘴的角度,盡量不能讓油噴到混合機兩端的墻板和槳葉上。當然適當控制油脂的加熱溫度,以防油溫過高噴到物料中產生油團。在工藝上增加犁刀混合機混合后成品檢驗篩,將混合后的油團打散去除。
犁刀混合機.jpg
英文版:
Have you done any maintenance work after using the Coulter mixer? After all, the plough mixer will leave some material in it after use, for various considerations, we need to remove the residue. In the process of cleaning up, we may encounter some difficult areas to clean up, this time it requires some skills.
The first step is to check whether there is a gas injection device in the oil adding pipeline. And whether the nozzle of the Coulter mixer is blocked. Is the screen mesh damaged in the oil filter? It is necessary to adjust the angle of the nozzle of the plough mixer and try not to allow oil to be injected into the wall panels and blades at both ends of the mixer. Of course, the heating temperature of the oil should be properly controlled to prevent the oil temperature from being too high and spray into the material to produce oil clusters. Add the plough cutter mixture to the finished product inspection screen and remove the mixture after mixing.
聯系我們
咨詢熱線:15861434319

地址:江蘇省無錫前洲工業園
銷售一部:15861434319
銷售座機:0510-83390359
聯系人:屠經理
郵 箱:419309846@qq.com

上海天天彩选4 黑龙江快乐十分 甘肃11选5 黑龙江快乐十分 河南11选5 河南11选5 湖南快乐十分 甘肃11选5