超级彩票助手

您好,歡迎訪問無錫市嘉隆設備科技有限公司官放網站!

全國咨詢熱線15861434319

當前位置: 首頁 > 新聞動態 > 公司動態 簡單來說下槽型混合機的使用說明
來源:無錫嘉隆 時間:2018-10-01 點擊量:
槽型混合機的使用說明:
1、使用前應進行一次空運轉試車,在試車前應檢查機器全部聯接件的緊固程度,減速機的潤滑油量和電機設備的完整性,然后閉合電源總開關進行空運轉試車。分別點動倒料、復位按鈕,檢查工作情況是否良好,符合上述要求后進行加工(倒料按鈕與復位按鈕不能同時進行使用)。
2、加料后必須將料槽蓋板蓋好,以免物料淺出料槽,蓋為有機玻璃能觀察物料的攪拌情況,如攪拌達到效果后,點動倒料按鈕進行倒料,當料斗接近機座時即停止,以防止壞機件,倒料完畢后,按下復位按鈕,使料槽復合到原來位置。
槽型混合機.jpg
The use of trough mixer is as follows:
1. An empty running test run should be conducted before use. Before test run, the fastening degree of all the connecting parts of the machine, the lubricating oil quantity of the reducer and the integrity of the motor equipment should be checked. Then the main switch of the power supply should be closed for empty running test run. Click the switch and reset button respectively to check whether the work condition is good or not, and then process after meeting the above requirements (the switch and reset button can not be used at the same time).
2. After feeding, the cover plate of the hopper must be covered well so as to avoid shallow discharge of the material from the hopper. The cover is made of plexiglass, which can observe the stirring of the material. If the stirring effect is achieved, the hopper can be poured by clicking the pouring button and stop when the hopper is close to the machine base, so as to prevent the broken parts. After pouring, the reset button is pressed to make the hopper compound to the original material. Come to the position.
聯系我們
咨詢熱線:15861434319

地址:江蘇省無錫前洲工業園
銷售一部:15861434319
銷售座機:0510-83390359
聯系人:屠經理
郵 箱:419309846@qq.com

上海天天彩选4 黑龙江快乐十分 甘肃11选5 黑龙江快乐十分 河南11选5 河南11选5 湖南快乐十分 甘肃11选5